Airopower systems make Semi Automatic fully pneumatically operated Offline PVC Pipe end belling Machine from 50mm to 160mm for S.W.R /RRC/RRJ system (rubber ‘O’ ring) Type belling by Air blowing mandrel & external moulds in One Piece water cooled Mould base. Two Nos. Internal external pipe end contact type heating stations. Machine Includes Pneumatic Air booster pump + reservoir, FRL and one Pipe supporting stand with Guide rollers.
Powerful pneumatic locking and pipe compression which also improves socket groove quality and consistency during socket forming process in SWR type socketing.
Note: Tolerance in thickness of pipe will be + 0.2mm in each is tooling set.
IMP: Kindly arrange for the samples of 2 Feet length of each size as per your order & thickness of the Pipe (5Nos each)
| Machine Dimensions | 1200mmL x 750mmW x 1600 H. |
| Pipe Support Stands | 800mmL x 300mmW x 700mm H – ( 1 No) |
| Pipes Size Capacity | 50mm to 160mm. |
| Pipes Wall thickness | 1mm to 5mm. |
| Pipe Length | Minimum 300mm to 6000mm Maximum. |
| Maximum Electrical Load | 2.5 Kw. Single phase 230V AC. 50Hz. |
| Water Connection | 14°C to 18°C filter water @ 2kg/cm2 at Inlet ½ BSP, Outlet free to discharge ½” BSP. |
| Compressed Air | 8 – 10kg/cm2 filter & moisture free air direct line from compressor ½” BSP. |
| Machine’s Weight | 550kgs approximate with 110mm tooling set & pipe supporting stand. |
| Control Panel | Electrical control panel with digital display of cooling (forming) Programmer, temperature controller, cycle counters & other necessary Indications. |
| Tooling Sets (Dies) | 1. Blowing Punch (Mandrel): EN8 materials with hard chrome
plating 4 parts assembly punch Ring, Blow Punch, and Silicon U
Seal & Punch Guide. 2. Stainless Steel material & companies monogram, Pipe size engraved on it (Aluminum casted moulds Optional) each size of tooling set consist of 2 Nos. of ID & OD contact type hard chrome plated heating cavities with Stainless Steel brass band heaters. |
| Pipe Supports | Machine consist of Pipe supports sliding & manual rotational Guide rollers. One M.S Angles fabricated stand provided with Sliding guide rollers & manual rotational guide Rollers. |
| Connections | Machine required only Air, water connections as per specifications die fitting with heater connection as per pipe size fully wired & plumbed machine unit with protection relays & F.R.L Unit. |
