Injection Molded PVC Pipe Fittings Grooving Machine

Semi Automatic S.W.R (Injection Moulded) Fittings Ring (Grooving) Socketing Machine

Model-APS- FRS – 50 – 160

Semi Automatic S.W.R PVC Moulded Fittings Ring Socketing Machine for 50mm to 160mm S.W.R PVC molded fittings by Water cooled Air Blowing Mandrel & Water cooled External Moulds, Special G.M. Ejector Bush with Pneumatic Ejector system. One mechanical Toggle type Forming Station with Clamping & Cooling time Adjustment. Four nos contact type aluminum Heating Stations with touch free IR Sensor Input, individual Light Flash & Buzzer Indications.

  • Completely all in one PLC controlled operation. Fully Wired and plumbed unit.
  • (New Hitech Pressure Intensifier system for Exact Square Ring ( Sharp) Forming)

General Specifications:

Dimensions: 1400mm x 750mm x 1000 Height
Fittings Size Capacity: 50mm to 160mm
Fittings Wall Thickness: 1mm to 5mm
Fittings types: All standard sizes and types as per IS: 14735: 1999
Maximum Electrical Load: 2.4 Kw. Three phase 440V AC. 50Hz
Water Connection: 140C to 180C filter water @ 2kg/cm2 at Inlet ½” BSP, Outlet free to discharge ½” BSP.
Compressed Air: 8 – 10kg/cm2 filter & moisture free air direct line from compressor ½” BSP
Machine’s Weight: 650kgs approximate with 110mm tooling set.
Control Panel: Electrical control panel with digital LCD display all in one PLC & necessary indications
Tooling Sets (Dies): Blowing Punch (Mandrel): EN8 material with chrome plating 4 parts assembly punch Ring, Blow Punch, Silicon U-Seal & Gun metal Ejector ring.
Moulds: Special graded Steel material with hardchrome plating 2. Each size of tooling set consist of 4 Nos. of ID & OD constact type Aluminium heating cavities with Stainless Steel flat heaters.
Fittings Supports: Machine is provided with 2nos Sizing gauges
Connections Specifications: 3 Machine required only Air, Water Connections as per
Plumbed: Die fitting with heater connection as per pipe size fully wired & plumbed machine unit with protection relays & F.R.L Unit.

Special Features:

  • Faster Output, No Ideal Time between forming cycle.
  • Complete Pneumatic operation.
  • Four Heating Stations with individual PID action to save heating Load.
  • Solid steel dies with Hard-chrome plating.
  • In Built Air Reservoir with two FRL Units, Only 8 Bar Air Inlet required.
  • Individual Infrared sensor & Light flash indications after completion of Heating cycle.
  • Maintenance Free & Easy operation.
  • 440VAC, 50Hz, 5KW power Supple Required.
Back
Top